Single Bubble Reflective Insulation (White/Foil) 6'x125' - 750 sq ft

EcoFoil Single Bubble Foil Insulation is primarily used in pole barns, metal buildings, basement walls, crawl spaces, and storage units located in moderate climates. Single bubble insulation combines the heat-shielding properties of solid radiant barrier with a layer of polyethylene bubbles, which acts as a built-in air gap that reduces contact between temperatures on either side of the product. The layer of bubbles effectively combats the formation of frost and condensation that can occur when temperature differences are extreme on either side of the material. It's very thin (approximately 1/8" thick), lightweight, and installs easily with minimal equipment. Our white/foil variety a white finish that faces towards your finished space, providing a more "finished" look.

Why choose a 6' roll?

EcoFoil Single Bubble White Insulation performs the same regardless of what size roll is used. A common reason for choosing our 750 sq. ft. roll is if it provides savings in installation cost or time to install. Because this roll is considered "over-sized", it makes it more expensive than our standard 4' roll. As a result, it is often more economical to go with the 500 sq. ft. roll in the same amount of square footage needed for an application. If you need assistance comparing the costs, or for a custom quote, please give us a call at (888) 349-3645 and we would be glad to help walk through this to ensure you get the product that is right for you!

A radiant barrier and vapor barrier, all in one product

Not only does Single Bubble Insulation reflect radiant heat, when properly installed with tape it also acts as a vapor barrier, preventing the passage of moisture and other unwanted particles which can cause mold. In order to establish a vapor barrier, you must tape all seams and joints to prevent air passage, keeping moisture and other particles from passing through.